Sealcoating: How Long Does It Take to Cure?

December 10, 2019 2:06 am Published by

Now that the fall and winter seasons are upon us, many of our customers are asking us about sealcoating cure time in Santa Rosa, CA. As with any construction or paving project, the answer depends on a number of factors, including the weather.

Sealcoating refers to a protective coating that’s laid over asphalt-based pavement in order to protect it from water, wear and tear, oil and UV damage. It typically extends the lifetime of your asphalt by about 10 to 20 years. Here are answers to some of the most common sealcoating FAQs in Santa Rosa, CA.

When is the best time of year for sealcoating?

Depending on the type of sealcoat you use, the best time to apply it is in the summer, thanks to high heat and relatively low humidity. Temperature isn’t the sole factor involved, but warmer weather helps. If you’re using a water-based sealant, you cannot sealcoat when the temperature is under 40 degrees Fahrenheit. That’s because when the temperature drops that low, the water in the sealant is likely to freeze before the sealcoat can fully cure.

However, depending on the amount of sunlight your asphalt receives, a sunny winter day (with no fog, rain or excessive humidity) can be acceptable as well. Consider how much of an inconvenience it might be if you couldn’t use your parking lot or driveway for more than 48 hours before committing to this service.

How long does sealcoating take to cure?

If the weather conditions are ideal, the sealcoat will be ready for traffic after a 24-hour sealcoating cure time in Santa Rosa, CA, but it may take longer if the weather is cooler or humid. While the sealcoat may feel dry to the touch before 24 hours have passed, it may still be too wet to stand up to tires and traffic.

What’s the best time of day to apply sealcoating?

Depending on whether you’re a homeowner or business owner, this may vary. For homeowners, you might choose to wait until about 10 a.m., when the sun is high and will provide the most direct light. Business owners, on the other hand, often choose to have their driveways and parking lots sealcoated at night to help mitigate the effects of the 24-hour-minimum cure time.

How long do I have to wait after laying asphalt to sealcoat?

Since asphalt needs a good deal of time to cure, you should wait at least six months after laying fresh asphalt before sealcoating it. That gives the asphalt enough time to settle, cure and compact.

Sealcoat your asphalt with Sikes Asphalt Group Inc.

Sikes Asphalt Group Inc. is the area’s premier paving contractor. We get the job done right the first time, from paving to sealcoating. We’re not just dedicated to results—we want our customers to know exactly what we’re doing and why. From residential and commercial jobs to custom projects big and small, we’re here to provide you with a full range of quality services, designed to meet and exceed your expectations. For more answers to sealcoating FAQs in Santa Rosa, CA, reach out to us today!

Categorised in:

This post was written by writer

Comments are closed here.