Reasons for Visible Scuff Marks After Sealcoating

December 27, 2019 3:30 am Published by

It’s a good idea to get the answers to all your sealcoating FAQs in Santa Rosa, CA before finalizing a new asphalt project. The information you collect will help you care for your sealcoated asphalt surface so it lasts you a long time without problems such as unsightly scuffing. The good news is that scuff marks on new sealcoating are usually temporary and will fade with time. Ultimately, the sealcoat becomes more resistant to scuffing as it hardens.

If you’re a homeowner or commercial property owner who wants to gain a better understanding of what’s going on at the surface, read on! Below are some of the reasons why there may be visible scuff marks after new sealcoating has been applied:

  • Weather conditions: Certain kinds of weather conditions affect sealcoating more than others. Extreme heat and humidity, for example, can soften the sealcoat—and the softer the composite, the easier it scuffs. This is why scuffing of newly applied sealcoating is more common and more prominent during the hot summer months. Your best bet is to apply sealcoating when the outside temperature is above 50 degrees. If it’s too cold, you are likely to run into longer cure times. Rain is also responsible for extended cure time, and is known to wash away newly-applied sealcoating.
  • Vehicle traffic: Because the weight and pressure of heavy vehicles bearing down on asphalt with fresh sealcoating makes it susceptible to scuffing, driving over sealcoating that is not completely cured increases the chance of scuff marks. Certain types of tires can also pose problems. Vehicles fitted with off-road or steel-belted tires are more likely to scuff new sealcoating than those with standard tire tread.
  • Driving styles: The driving styles of aggressive drivers tend to lead to scuff marks. This includes sudden braking, taking tight turns and whipping hard back and forth between lanes. If you want to preserve your tires and the roads, drive defensively in a controlled manner.
  • Use: Some paved areas are used more frequently than other, and they are used for different purposes. While one area might get downtime after curing, another has little choice but to allow vehicles to drive over it as soon as it’s cured. These paved areas experience high volumes of traffic the moment the curing process is complete, which can lead to scuffing.
  • Other causes: There are also other factors that can cause scuffing. If the new sealcoating doesn’t have enough time to harden before it’s opened up to foot or vehicle traffic, the surface can get marked up. Additionally, the texture of the asphalt underneath the sealcoat affects the likelihood of scuffing. Asphalt that is more rough than smooth is more resistant to scuffs, because the protective coating absorbs easily into the rough texture.

If you own an asphalt surface with a new sealcoat layer, do what you can to prevent scuffs from vehicles and foot traffic. Call Sikes Asphalt Group Inc. today to schedule paving service or sealcoating maintenance in Santa Rosa, CA. We look forward to assisting you soon!

Categorised in:

This post was written by writer

Comments are closed here.